E-mail: buyworldproducts@gmail.com
  • English
  • Español
  • Français
  • 日本語
  • Российская
  • World Industry |
  • World Auto Fitting |
  • World Valve  |
  • World Sanitary Ware |
  • Contact Us |
  • Home
  • ~ Balancing valve
  • ~ Safety valve
  • ~ Pressure reducing valve
  • ~ Automatic control valves
  • ~ Air vent valve
  • ~ Radiator valve
  • ~ Lockshield valve
  • ~ HV valves
  • ~ Bypass valve
  • ~ Ball valves
  • ~ Bibcock
  • ~ Angle valve
  • ~ Gate valve
  • ~ Cut-off valve
  • ~ Check valve
  • ~ Float valves
  • ~ Pipe fittings
  • ~ PVC ball valves
  • ~ Fire safety valve
  • ~ Bronze valve
  • ~Solenoid valve
  • ~ Two-piece bronze
  • Gas ball valves,gas cocks & loglighters
  • ~Supply-straight pattern
  • ~ Hose bibbs & garden valves
  • ~ Angle sillcocks
  • ~Stop & waste valves
  • ~Bronze & bronze gate & check valves
  • ~Speciality valves
  • ~Boiler drains
  • ~Other valves
 

Balancing valve

ZWB888
ZWB888 SECTION OF BALANCING VALVE
ZWB888/Y
ZWB888 Y-PATTERN STOP BALANCING VALVE
   
ZWB222
ZWB222 ECONOMIC Y-PATTERN STOP BALANCING VALVE
ZWB555 / DZR
ZWB555 DZR STRAIGHT STOP BALANCING VALVE
   
ZWB666
ZWB666 CASTED IRON Y-PATTERN BALANCING VALVE
ZWB777T
ZWB777T FIGURE CUTAWAY VIEW
   
ZWB777T
ZWB777T FULL BORE STRAIGHT STOP BALANCING VALVE
ZWB777S
ZWB777S FULL BORE STRAIGHT STOP BALANCING VALVE
   
ZWB999S
ZWB999S LOW FLOW BALL BALANCING VALVE
ZWB999T
ZWB999T LOW FLOW BALL BALANCING VALVE

Balancing valve

A. Using occasion
The designed temperature for using this valve is between -25ºC and + 150ºC. Nominal pressure is 2Mpa. The suitable medium is water and steam. Balancing the flow in boilers and chillers. There are always parallel connection installed several sets in one water supply system. The different resistance of the setups makes the different flux of the sets. It can make sure to obtain the enactment and ensure the safety of them if to fit balancing valves for each boilers or chillers.
It can make sure of the second time pipeline's flux same as the designed numerical value, and keeps each set working up to stuff. When the chiller needs to be connected with several refrigeration sets, it can be fitted in each set.
It can be fitted in the areal of heat supply system and be used for the flux balance keeping. It should be fitted at the entryway because of the different heat source and the different distance from the destination.
B. Working theory and features
Working theory: changing the clearance among cartridge, seat and flow, changing the currency resistance through valve in order to adjust the circuit
Balancing valve belongs to adjusting valve. It's specialize valve which can adjust the pressure and show the numerical value, it is also a kind of energy saving product with accurate controlled value. Balancing valve is designed as the 55° with the cannon and the liquid, this can reduce the loss of pressure. The body is made of bronze which erode-resistant. The seat is made of Teflon which can endure high and low temperature.

E-mail: buyworldproducts@gmail.com  
ETW International