| |

|
SOUTH AMERICA BALL VALVE
This valve is designed to be soft soldered into lines without disassembly, using a low temperature solder to 420° F(216℃), A higher temperature solders may damage the seat material. When applying heat, avoid direct flame to the center of the valves body, excessive heat can do harm to the seats. After soldering, the packing nut may have to be tightened. |
|
|
|
1.Nominal Pressure: 2.0MPa
2. Suitable Medium: Water,Non-Causticity Liquid & Saturated Steam
3. Working Temperature: -20℃≤t≤100℃
4. Thread Joint Between Body & Cap Using Anti-Oxygen Glue
5.Solder Socket To ANSI B16.18
6. Standard Port
|
NO. |
Component |
Material |
1 |
Body |
C37700 |
2
|
Bonnet |
C37700 |
3 |
Ball |
C37700 |
4 |
Seat Ring |
Teflon |
5 |
Stem |
C37700 |
6 |
Packing Rings |
Teflon |
7 |
Handle |
Carbon Steel |
8 |
Nut |
Steel |
|