This valve is designed to be soft soldered into lines without disassembly, using a low temperature solder to 420° F(216℃), A higher temperature solders may damage the seat material. When applying heat, avoid direct flame to the center of the valves body, excessive heat can do harm to the seats. After soldering, the packing nut may have to be tightened.
1.Nominal Pressure: 1.6MPa
2.Suitable Medium: Water,Non-Causticity Liquid&Saturated Steam
3.Working Temperature: -10℃≤ t ≤ 100℃
4.Pipe Thread To ISO-228-1:2000
CSA APPROVED
UPC APPROVED
UL APPROVED |
NO. |
Component |
Material |
1 |
Body |
C37770 |
2
|
Bonnet |
C37770 |
3 |
Ball |
C37770 |
4 |
Seat Ring |
Teflon |
5 |
Stem |
C37770 |
6 |
Packing Rings |
Teflon |
7 |
Washer |
C37770 |
8 |
Handle |
Carbon steel |
9 |
Nut |
Stainless Steel |
|
